Keyring multitool packed with functions to save time, money and trips back to the van. For UK plumbing fixtures and useful for so much more.
Easily clipped to your keys and small enough to fit in your pocket. Carry it with you & have the right tool wherever you go, for life!
- Heat treated stainless steel
- Lifetime guarantee
Details & Features
1. Main Valve Grip Slot
Used for many plumbing fixtures; gate valves, boiler valves, taps, drain valves, pump valves, broken filling loops etc, plus nuts and bolts if required, quicker than a spanner, just slide on and turn, or spin even.
2. Meter box key/ Hex Bit Holder/ Screwdriver
Open Gas and Electrical meter boxes, Fitted with a powerful N52 magnet it will hold your hex bits securely and turns the tool into a screwdriver.
3. 10mm Spanner
A tight 10mm specifically to fit all gas meter test points but useful in many situations, it can also be used as bottle opener, as with many tasks, this tool has more than one way of tackling them, on the side is a small feature for isolation valves with poor access.
4. Small Side Slot
The small, or thinner side slot is primarily designed for lock shield/radiator valves. the tool effectively becomes an ergonomic handle for them.
5. Large Side Slot
Square shaped drain valves and any other valves that are too big for the thinner slot can be used in the wider one.
6. Bottle Opener
The large slot enables the tool to function as a sensible, ergonomic bottle opener.
7. Wire Stripper
A 'v cut' at the base of the large side will strip cables and wires.
8. Radiator Bleed Key
Deep socket radiator key even gets to those tricky backwards facing valves
9. Pump Bleed 'Coin Tool'
This feature also works on isolation valves better than the flat adjacent bit that was intended for them! useful for kitchen sink waste fixing
10. Flat Bit / Pry tool
Flat head screwdriver can be used cut open boxes, turn isolation valves and pry open tins of paint, water meter covers etc, you will find a new use for this each day, it will not break!, we guarantee that..
11. Side Hex-Bit Holder
Another N52 magnet turns the tool into a tight access or high torque screwdriver / wrench, also useful for keeping a spare bits in!!
12. Pipe De-Burring Tool
15mm copper pipes can be de-burred by rotating against the back corner of the triangle section.
quality snap hook for clipping to your keys and helping you to keep your tool with you at all times. plus all the keys that come and go, on and off in a flash, but safe and strong
Using some of the side slots and straight edge you can use the tool to measure up and mark out 90 Degree angles, 15mm, 25mm & 2" straight edges.
15. Heat Treated
This tool has has been developed to be tough, so tough we're giving it a lifetime guarantee.
PLUMB CHUM ™
Very handy tool
Pricey and not used it yet.
I’ve had this a few weeks, the best thing about it is the little flat blade at the end of it, I use this for isolation valves.
PLUMB CHUM ™